Effective ways to reduce the loss of laser cutting machine

  When using a laser cutting machine, under the premise of ensuring its cutting quality, it will do everything possible to reduce its loss. Is there any way to reduce its loss? Today, the editor will introduce to you effective methods to reduce the loss of laser cutting machines.
  1. Before turning on the laser cutting machine, push the beam to move forward and backward by hand, and the cart can move left and right without abnormal noise before it can be powered on. When you finish the work of the day, you should carefully clean up the waste and debris in the machine, so that the machine motion system can be prevented from being damaged by foreign objects.
  2. No items can be placed in the machine to avoid unnecessary damage to the machine.
  3. Clean the dust and foreign matter on the metal oil tanker, metal shaft, sliding block and linear guide with cotton cloth, and then add lubricating oil, and carry out empty reciprocating motion.


  4. Put a little lubricating oil on the screws, including the screws on the laser tube support and the reflector, which can facilitate the disassembly and assembly during maintenance. Do not add lubricating oil to timing belts, drag chains, air pipes, motors, sensors, lenses, and wires.
  5. Do a good job in the maintenance of the laser cutting machine, and we must do a good job of lubricating the moving parts of the laser cutting machine.
  The price of laser cutting machine is not low, ranging from hundreds of thousands to millions. Therefore, reducing the loss of the laser cutting machine as much as possible can prolong the service life of the laser cutting machine and save the production cost. It can be seen that the daily maintenance and maintenance of the laser cutting machine is very important.

Leave a Comment

Your email address will not be published. Required fields are marked *