How to prevent the cutting gap of the fiber laser cutting machine from being too large?

How to prevent the cutting gap of the fiber laser cutting machine from being too large?

The fiber laser cutting machine has become an indispensable processing tool in the sheet metal processing industry. Its high efficiency, high precision, and saving manpower and material resources have made the fiber laser cutting machine gradually occupy the market of the sheet metal processing industry. It is used in our daily lives. When the fiber laser cutting machine is processing, occasionally there will be a large gap in the cutting track, which makes the cutting accuracy of the workpiece lowered and cannot meet the requirements of production. Waste manpower and material resources. When we encounter such a problem, what should we do? BCAM engineers have summed up three solutions:

  1. Check whether the lens of the laser cutting machine is damaged and dirty. If the laser scatters due to these and the laser beam becomes larger, the solution can be solved by cleaning the lens and replacing the lens.
  2. The laser cutting machine mainly focuses the laser beam to cut the workpiece. If the above problems occur, it is also very important to check the quality of the laser spot. If there are bright spots, spots, voids and other unfocused phenomena, the relative laser support Point, the direction is appropriate. To solve this kind of problem, the laser needs to be replaced.
  3. Check whether there is any problem with the focus of the laser, pay special attention to cleaning the lens, changing the focus after replacing the new lens, and adjusting the correct focus value

Leave a Comment

Your email address will not be published. Required fields are marked *