What should be paid attention to when installing the laser cutting machine lens?

What should be paid attention to when installing the laser cutting machine lens?

The lens of the laser cutting machine is composed of a focusing mirror and a reflecting mirror, which is an important part of the laser machine. The requirements are strict during use. If this part is not installed in accordance with the prescribed steps, it is easy to cause deviation of the cutting center or even the edge of the cutting machine groove. So what aspects should be paid attention to when installing the laser cutting machine lens?
  The first step: Please wash your hands before operation. It is best to wash your hands with soap or detergent. This is a good habit for normal operation of the cutting machine lens. Do not directly touch the lens with your bare hands, and you should wear special gloves to prevent fingerprints from being left on the lens and affecting accuracy.
   Step 2: When placing the lens, you should pay attention to it stably so as not to fall and break it. At the same time, pay attention to the convex surface of the lens and place it flat on a stable and clean table. At the same time, check that there is no debris on the desktop to avoid confusion or affect the operating environment of the lens.
   Step 3: Protect the lens of the laser cutting machine from moisture. You can’t use the traditional blowing method to wipe the lens, let alone use hot air to blow the lens against the lens, so as to avoid the sudden change of heat and damage the lens. The lens is of high-precision, temperature and humidity are strictly controlled, so as not to affect the lens surface protective film and optical accuracy.
   Step 4: After the laser cutting machine lens is assembled, pay attention to the cleaning and dust removal of the lens. It is best to use a clean air spray gun to clean it, not an ordinary spray gun.
   Step 5: The lens of the cutter must be kept absolutely clean, and do not touch the surface of the lens directly with your hands, and strictly prevent other non-designated objects from directly contacting the surface of the lens. In the cleaning and maintenance of the lens, use a professional wipe paper to gently pull it from side to side to avoid scratching the surface of the lens.
  The lens of the laser cutting machine mainly plays the role of focusing and reflection. A good lens can improve the cutting speed and cutting effect of the laser cutting machine. Therefore, we must be careful when installing the lens of the laser cutting machine.

Leave a Comment

Your email address will not be published. Required fields are marked *